F系列减速机，结合国际技术要求制造，具有很高的科技含量，节省空间，可靠耐用，承受过载能力高，功率可90KW一上，能耗低，性能优越，减速机效高达95%以上，振动小嗓音低，节能高，选用优质锻钢材料，钢性铸铁箱体，齿轮表面经过高频热处理，经过精密加工，确保轴平行度和定位的精度，这一切构成了齿轮传动总成的减速机配置了各种类电极，形成了电极一体化，完全保证了产品使用质量特性。

技术参数：
    功率：0.12KW～200KW
     转 矩：3N·m～22500N·m
     输出转速：0.06～374r/min

结构形式：

     F-轴伸式、底脚安装
 FA-轴装式联接
 
     FF-轴伸式、法兰安接
 KAF-轴装式、法兰安装
 
     D-表示轴输入
 

产品特性

1.高度模块化设计：可以方便地配用各种型式的电动机或采用其它动力输入。同种机型可配用多种功率的电动机。容易实现各机型间组合联接。
2.传动比：划分细，范围广。组合机型可以形成很大的传动比，即输出极低的转速。
3.安装形式：安装位置不受限制。
4.强度高、体积小：箱体采用高强度铸铁。齿轮及齿轮轴采用气体渗碳淬火精磨工艺，因而单位体积承载能力高。
5.使用寿命长：在正确选型（包括选用适当的使用系数）和正常使用维护的条件下，减速机（除易损件外）的主要零部件寿命一般不低于20000小时。易损件包括润滑油、油封以及轴承。
6.噪声低：减速机主要零部件都经过精密加工，并通过组装和测试，因而减速机噪声较低。
7.效率高：单机型效率不低于95％。
8.可承受较大的径向载荷。
9.可承受不大于径向力15％的轴向载荷。

F Series reducer, combined with international technical requirements of manufacturing, high tech, space-saving, reliable and durable, to withstand high overload capacity, the power to 90KW one on the low energy consumption, superior performance, speed reducer efficiency up to 95% or more,voice low vibration, high energy, high-quality forged steel material, steel cast iron box, the gear surface after high-frequency heat treatment, through sophisticated processing, parallel shaft and positioning to ensure accuracy, all this constitutes a deceleration gear assemblymachine equipped with various types of electrodes, forming the electrode integrated, fully guaranteed product quality characteristics.

Technical parameters:
    Power: 0.12KW ~ 200KW
     Torque: 3N · m ~ 22500N · m
     Output speed: 0.06 ~ 374r/min

Structure:

     F-shaft type, foot-mounted
 FA-shaft-mounted connection
 
     FF-shaft type, flange mounting connected
 KAF-shaft mounted, flange mounting
 
     D-said input shaft
 

Features

 


1. Highly modular design: can be easily equipped with various types of motor or using other power input.The same kinds of models can be equipped with a variety of power of the motor.The combination of easy connection between models.
2. Transmission ratio: by thin, wide range.Model can form a great combination of gear ratio, that is, the output low speed.
3. Mounting: installation location is not limited.
4. High strength, small size: box made of high strength cast iron.Gears and gear shaft grinding process using gas carburizing and quenching, and thus the high carrying capacity per unit volume.
5. Long life: the correct selection (including selection of appropriate use factor) and normal maintenance conditions, the speed reducer (except wearing parts) of the main parts of life is generally not less than 20,000 hours.Wearing parts including lubricants, oil seals and bearings.
6. Noise Low: reducer main parts have been precision machining, and through the assembly and testing, and thus lower noise reducer.
7. Efficiency: single type of efficiency is not less than 95%.
8. Subjected to high radial load.
9. Can withstand the radial force of less than 15% of the axial load.