50FSY-20型与WSY型立式玻璃钢液下泵
 |
|
详细介绍: |
一、FSY型、WSY型立式玻璃钢液下泵产品概述： FSY型、WSY型立式玻璃钢液下泵为本单位生产的WSY型、FSY型两种型式的泵，1．WSY型立式玻璃钢液下旋涡泵。2．FSY型立式玻璃钢液下离心泵，FSY型、WSY型立式玻璃钢液下泵因伸入贮罐，贮槽的深度长短不同，设计液下深度800mm--3000mm之间任意选择。FSY型、WSY型立式玻璃钢液下泵只要液体高于泵体，即可不灌液而起动送液，平盖板下设有泄漏孔，液体不会向贮罐外泄漏。 本泵与介质接触的零部件，系用聚乙烯醇缩丁醛改性酚醛玻璃纤维，经高温模压成型的酚醛玻璃钢制件，联接管、出液管采用半干法卷制工艺制成的酚醛玻璃钢管，叶轮轴套的装配均用酚醛胶泥和泵轴粘成一体，液下各部装配均用酚醛胶泥粘结，伸入液下全无金属与介质接触，耐腐性能JD可靠，产品具有轻质、高强、不变形、耐温、耐腐蚀等优良性能，FSY型、WSY型立式玻璃钢液下泵在防腐方面可部分替代含钼不锈钢、钛及钛合金等贵重金属。 FSY型、WSY型立式玻璃钢液下泵在传动和旋转方向：泵通过爪型弹性联轴器由电动机直接驱动，从电动机端看泵为顺时针方向旋转。 二、FSY型、WSY型立式玻璃钢液下泵主要用途： FSY型、WSY型立式玻璃钢液下泵广泛用于化工、石化、冶炼、染料、农药、制药、稀土、化肥等行业，在贮罐上输送不含悬浮固体颗粒，不易结晶，温度不高于100℃的各种非氧化性酸(盐酸、稀硫酸、甲酸、醋酸、丁酸)等腐蚀介质的 理想设备。 三、FSY型、WSY型立式玻璃钢液下泵型号意义:
FSY型、WSY型立式玻璃钢液下泵,WSY型立式玻璃钢液下旋涡泵,FSY型立式玻璃钢液下离心泵性能参数
型号 | 流量Q | 扬程H
(m) | 转速n
(r/min) | 功率N
(Kw) | 叶轮直径D
(mm) | 吸上高度
(Hs) | (m3/h) | (L/S) | 25WSY-22 | a 型 | 2.88
4.05
6.48 | 0.80
1.12
1.80 | 22
18
15 | 2900 | 2.2 | 120 | 800 至 3000 | 25WSY-30 | 2.88
6.48
9.00 | 0.80
1.80
2.52 | 30
20
15 | 2900 | 3 | 120 | 40WSY-258 | 5.76
8.10
13.32 | 1.60
2.24
3.70 | 25
20
15 | 2900 | 4 | 142 | 40FSY-22 | 8.10
15.84
20.00 | 2.24
4.4
5.50 | 22
18
15 | 2900 | 3 | 140 | 40FSY-18 | 6.48
15.00
21.60 | 1.80
4.17
6.00 | 18
15
12 | 2900 | 2.2 | 132 | 40WSY-50 | b 型 | 6.48
8.64
14.40 | 1.80
2.40
4.00 | 50
45
35 | 2900 | 7.5 | 144 | 40FSY-35 | 10
20
30 | 2.8
5.5
8.3 | 34
30
24 | 2900 | 4 | 162 | 50FSY*35 | 30
45
55 | 8.3
12.5
15.1 | 35
32
28 | 2900 | 7.5 | 182 | 50FSY-35A | 25
35
45 | 7.0
9.7
12.5 | 26
25
22 | 2900 | 5.5 | 168 | 50FSY-20 | 18
30
35 | 5.0
8.3
9.7 | 20
16
12 | 2900 | 4 | 150 | 80FSY-35 | 56
92
110 | 15.5
25.5
30.5 | 35
29
25 | 2900 | 15 | 184 | 80FSY-35A | 45
69
90 | 12.5
19.2
25.0 | 26
22
19 | 2900 | 11 | 163 |
WSY型立式玻璃钢液下旋涡泵,FSY型立式玻璃钢液下离心泵的(A型)外型图
|
FSY型、WSY型玻璃钢液下泵(FSY s mould and WSYs mould tempered glass liquid decends the pump)
本单位生产的WSY型、FSY型两种型式的泵,1.WSY型泵为立式玻璃钢液下旋涡泵。2.FSY型泵为立式玻璃钢液下离心泵,该泵因伸入贮罐,贮槽的深度长短不同,设计液下深度800mm～3000mm之间任意选择。只要液体高于泵体,即可不灌液而起动送液,平盖板下设有泄漏孔,液体不会向贮罐外泄漏。
本泵与介质接触的零部件,系用聚乙烯醇缩丁醛改性酚醛玻璃纤维,经高温模压成型的酚醛玻璃钢制件,联接管、出液管采用半干法卷制工艺制成的酚醛玻璃钢管,叶轮轴套的装配均用酚醛胶泥和泵轴粘成一体,液下各部装配均用酚醛胶泥粘结,伸入液下全无金属与介质接触,耐腐性能JD可靠,产品具有轻质、高强、不变形、耐温、耐腐蚀等优良性能,在防腐方面可部分替代含铝不锈钢、铁及钛合金等贵重金属。
泵在传动和旋转方向:泵通过爪型弹性联轴器由电动机直接驱动,从电动机端看泵为顺时针方向旋转。
本泵广泛用于化工、石化、冶炼、染料、农药、制药、稀土、化肥等行业,在贮罐上输送不含悬浮固体颗粒,不易结晶,温度不高于100℃的各种非氧化性酸(盐酸、稀硫酸、甲酸、醋酸、丁酸)等腐蚀介质的 理想设备。
The product summary :
1.WSY s mould pump is the vertical tempered glass liquid underspin whirlpool pump to the two kinds of pumps of mould type on WSY s mould and the FSY s mould that this unit produced . 2.FSY the mould pump is under the vertical tempered glass liquid centrifugal pump , this pump is because of stretching the jar laying aside , and degree of depth length laying aside the slot is different , design liquid down arbitrary selection between the degree of depth 800mm - 3000mm . Namely as long as the liquid is more than the pump aspect , does not exactly irrigate liquid and starts the liquid sending , the flat blind flange has down a leakage hole , and the liquid will not outside Xiang Zhuguan leak .
This pump and the parts of medium contact is tied contracting the modified phenolic aldehyde glass fibre of Ding Quan with the polyvinyl alcohol , and being mould pressinged the phenolic aldehyde tempered glass finished piece of shaping through high temperature , and connectioing the phenolic aldehyde tempered glass pipe that Guan Chu s liquid pipe used half trunk law volume system technology to be made , the assembly of impeller axle sleeve is all glued into organic whole with phenolic aldehyde clay and the pump axle , and the next various assembly of liquid all glues the knot with the phenolic aldehyde clay , and stretching liquid decending Quan Wu s metal and the medium contact , it is absolutely reliable to endure the rotten capability , the product possesses gently nature and excellings in and unchangeable the fine capabilitys such as shape and endure Wen s corrosion preventive etc , can partly replace Han s aluminium stainless steel at the aspect of preserve and iron and the titanium alloy etc the valuable metal .
The pump is at transmission and the revolving direction : The mould elasticity shaft coupling of pump by way of the paw is by electromotor direct drive , and sees that the pump is the clockwise revolving from the electromotor end .
The trades such as the chemical industry and Shi Hua smelts , dyestuff , pesticide , pharmacy , rare soil and chemical fertilizer etc that this pump is extensively used , lays aside on the jar carrys not Han s suspended solid anything small and roundish , not easily crystallizes , the temperature not mores than various non- oxides of 100 ℃ acid ( hydrochloric acid , dilute sulfuric acid , formic acid , acetic acid and butyric acid ) etc the most ideal equipment of corruption medium .