| TECHNICAL DATA SHEET | | | | | | | | |
| | | | | | | | | | |
| Name of product: Rough Top Belting Cut Edge | | |
| | | | | | | | | | |
| Specification: 1200mm, XZ400/3P x Tan Carboxylated Nitrile R.T+Bare | | |
| | | | | | | | | | |
| Designation Standard Unit acc. DIN |
| | | | | | | | | | |
| Width 1,200 ± 3 mm | |
| | | | | | | | | | |
| Dimensions Total thickness of belt 7.2 ± 0.2 mm | |
| of belt Top cover thickness 3.2 ± 0.5 mm | |
| | | | | | | | | | |
| Bottom cover thickness 0 (Bare) mm | |
| | | | | | | | | | |
| Weight (approx.) 6.5 kg/M2 | | |
| | | | | | | | | | |
| Tension member Type of Ply / Number of Plies EP135 x 3 plies 一 | |
| | | | | | | | | | |
| Type of Rubber Compound (XNBR+NBR) 一 | |
| | | | | | | | | | |
| Tensile Strength Min. 16.5 Mpa. | |
| | | | | | | | | | |
| Rubber of belt Elongation at Break Min. 450 % | |
| cover Hardness 70 ± 2 Shore A | |
| Abrasion Max. 110 mm3 | |
| | | | | | | | | | |
| Specific Density 1.33 ± 0.05 g/cm3 | |
| | | | | | | | | | |
| Tensile Strength Min. 400 N/mm | |
| Full Thickness | | | | | | | | | |
| Elongation at Break Min. 10 % | |
| Tensile Tests | | | | | | | | | |
| Elongation at 10% Load Max. 1,5 % | |
| | | | | | | | | | |
| Top cover to Ply Min. 4.5 N/mm | |
| Separation | | | | | | | | | |
| Between the Plies Min. 5.0 N/mm | |
| Strength | | | | | | | | | |
| Bottom cover to Ply 一 N/mm | |
| | | | | | | | | | |
| Minimum drum diameter for Head Pulley Min. 100 mm | |
| | | | | | | | | | |
| *The cover rubber is highly wear resistant. |
| | | | | | | | | | |
| *Excellent resistance to oils and greases. |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |