Product name | Puff plastisol ink 咨询热线：谢燕红 QQ：1013292912 |
State | Paste |
Packing | 20KG/drum |
Storage | 12 months in cool place |
Application | Suitable for all fabrics which endurable in high temperature of 150-180 degree. |
Features | 1. High fastness 2. High glossy 3. High softness 4. SGS detecting passed, no phthalate, no heavy metal, no NPEOs. |
Mix proportion | White: White plastisol ink 60% + Clear plastisol ink 10% + Puff plastisol ink 30% Colored: Colored plastisol ink 10% + Clear plastisol ink 60% + Puff plastisol ink 30% |
Printing process | 1. Printing with clear plastisol ink for 1-2 times (4-6 scrapes per time) 2. Mixing white/colored plastisol ink, clear plastisol ink, puff plastisol ink and stirring them evenly 3. Printing again for 2-3 times. 4. Baking for 1~3 minutes under 150~180℃to dry it fast. 5. Finish. |
Attentions | - 1. More puff plastisol ink with lower washing ability.
- 2. Basement process is necessary to make good washing ability.
|
品名 | 高牢度发泡油墨 咨询热线：谢燕红 QQ：1013292912 |
外观 | 乳白色糊状 |
包装 | 20KG/桶 |
贮存期 | 常温下12个月 |
应用 | 100%棉、棉/涤混纺、涤纶、深浅色布、牛仔布等各种织物，凡满足以下两点的织物均可使用： 1.能耐150C～180C； 2.有透气性，可以使油墨渗透进去。不适合的承印物比如：塑料、金属、玻璃等及经防水处理的尼龙布。 |
卖点 | 1.超强洗水牢度 2.高亮度 3.手感柔软 4.符合美国ASTM对邻苯二甲酸脂和欧盟EN71 Part 3对重金属含量的要求 |
调配比例 | 印白色：白油墨60% + 透明油墨10% + 发泡油墨30% 印其他色：彩色油墨10% + 透明油墨60% + 发泡油墨30% |
工艺流程 | 1.丝网选用100-120目，用丝印硬方刀75度刮印, 以透明油墨打底1-2次，印第一次时用力刮4-6刀 2.将发泡油墨和其他油墨拌匀印2-3次 3.用热风枪吹至表干，然后160度焙烘过热15-30秒，不能压烫 |
注意事项 | 1. 发泡油墨比例不应太多，否则发泡越高越影响牢度。 2. 印发泡前应先打底，否则没有牢度。 咨询热线：谢燕红 QQ：1013292912 |