Working principle:
Green walnut peeling machine equipment mainly USES is free rotary cutting stripping technology, green walnut into the rotary cutting hob area, operate at a high speed under the action of hob, its green husk of cutting surface, at the same time the green walnut will be free rolling, in order to make the entire surface of the parts are subject to the effect of cutting force and achieve the result of peel evenly. Through preliminary cutting green walnut semi-finished products will be through a brush to clean the workspace, in this area, the green walnut has not clean the surface of the green husk, constantly by the removal of the steel wire brush, so that the green walnut get thoroughly peel them.
In addition, we adjust the barrier and the distance between the rotary cutting hob, you can set different size of walnut peel of the specific size, so that it can be multi-usage, according to the size of a green walnut in different areas of the different to set the cutting of different diameter, all-round to meet market demand.
Performance characteristics:
1, this product is my factory research and development of a new generation of green walnut peel, cleaning is a body comprehensive processing equipment.
2, light weight, small size, easy to transport, easy operation, flexible use, high processing efficiency.
3, green walnut peel off the net rate is above 96%, walnut shell damage rate is less than 0.3%. Due to many parts of the introduction of the thin-skinned walnut varieties, such as drum machine for its damage rate is very high, so our factory launched a walnut peel of special equipment.
4, suitable for small and walnut farmers, JiaGongHu processing enterprises.
5, the machine adopts 220 v light, power 1.5 KW, 1.5 KW or energy saving province electricity.
6, the machine low failure rate and long service life, simple operation, easy maintenance, use for a long time without any cost.
7, the equipment is stable running, low noise, parts quality assurance period is one year, free replacement parts and motors.
8, the native cost-effective, convenient save Labour cost, two people to operation, size according to the model, monthly minimum for processing 130 tons, the maximum processing 310 tons.
9, debugging is simple, the use of personnel according to walnut shape, size, adjust the blade clearance.
10, back to this quickly, if the external processing of walnut, sure processing fee.
Structure:
Three high mechanical production of walnut peeling machine mainly by the equipment rack part; Feeding part; Upper and lower cover plate; Transmission cover safety device; Single-phase motor; V-belt transmission; Transmission power section; Rotary drum; The adjusting grating; Steel wire brush to form a part of.
Directions for use:
1, the green walnut will reap before spraying 0.5% ethephon ripening agent, and then use thin film cover tightly, wu 2-3 days later, can be processed. Do not spray theripener appropriate piled up 3 to 5 days can also be processed.
2, the water pipe on the tail of the feed line, after the boot unscrewed tap water.
3, turn equipment on the power supply (220 v or 380 v), the boot can be charging. Note when feeding, one should be too much at a time.