Wireless Dimmable RF Motion Sensor MC022V/CP With Rotary Coding Switch
Description:
- Used in wireless networking of luminaires ,easy to install and free of wire .
- With advanced code detection technology, no code missing.
- Automatic switching based on motion and ambient light level.
- Zero-crossing point operation helps protect the sensor against in-rush current.
- 5.8GHz high frequency microwave(C-Band license-free operation)
- 4-pole press-in terminal (L, N, N,L′),easy assembly.
- Detection area, time delay and daylight threshold can be precisely set via DIP switch.
- MC022V-CP is innovative and active motion detector with HF system 5.8GHz .Motion can be detected through plastic ,glass and thin non-metal materials .Merrytek takes the lead in using the rotary coding switch in RF transceiver ,very easy to create groups
Specifications:
Operating voltage | 120-270Vac, 50/60Hz |
Rated load | Inductive:800W@227Vac,400W@120Vac |
HF system | 5.8GHz±75MHz, ISM wave band |
Power consumption | ≤0.5W(standby), <1W(operation) |
Transmitting power | <0.5mW |
Detection zone Max.(D x H) | 16m x 9m |
Motion detection | 0.5~3m/s |
Detection angle | 150°(wall installation) 360°(ceiling installation) |
IP rating | IP20 |
Operation temperature | -35℃~70℃ |
Hold time | 10s/30s/90s/3min/20min/30min |
Detection sensitivity | 25％/50％/75％/100％ |
Daylight sensor | 5lux / 10lux / 30lux / 50lux / Disable |
Life time | 50,000 hours |
Guaranty | 5 years |
Applications:
As built in RF wireless networking control ,this sensor is spcial for corridor and big warehouse use .