批发linksys spa3102  PSTN语音网关,有现货,一手货源，长期供应,欢迎外贸易商联系

spa400，spa2102，spa1001，spa2002，spa3000，spa9000，WAG54GP2，WRTP54G,长期供应。联系我们，拿最好的货源.

SPA3102 Phone Adapter Freeshipping

Product Description:
VoIP to PSTN (USA) Service Call Origination and Termination
PSTN (USA) to VoIP Service Call Origination and Termination
Single Stage and Two Stage Dialing
Forward Calls to VoIP service - Selective, Authenticated, All
Forward Calls to PSTN service - Selective, Authenticated, All
PSTN Line Sharing with Multiple Extensions
Automatic PSTN Fallback (Loss of Power or IP Service to Unit - with Quiescence to Normal Operations)
Advanced Inbound and Outbound Call Routing
Independent Configurable Dial Plans - Up to 8
Force PSTN Disconnection
Sequential Dialing Support
Specifications:
Voice Gateway with Router
Specifications
Model
SPA3102
Data Networking
MAC Address (IEEE 802.3), IPv4 - Internet Protocol v4 (RFC 791) upgradeable to v6 (RFC 1883), ARP - Address Resolution Protocol, DNS - A Record (RFC 1706), SRV Record (RFC 2782), DHCP Client - Dynamic Host Configuration Protocol (RFC 2131), DHCP Server - Dynamic Host Configuration Protocol (RFC 2131), PPoE Client - Point to Point Protocol over Ethernet (RFC 2516), ICMP - Internet Control Message Protocol (RFC792), TCP - Transmission Control Protocol (RFC793), UDP - User Datagram Protocol (RFC768), RTP - Real Time Protocol (RFC 1889) (RFC 1890), RTCP - Real Time Control Protocol (RFC 1889), DiffServ (RFC 2475), Type of Service - TOS (RFC 791/1349), VLAN Tagging - 802.1p, SNTP - Simple Network Time Protocol (RFC 2030), Upload Data Rate Limiting - Static and Automatic, QoS - Voice Packet Prioritization over Other Packet Types, Router or Bridge Mode of Operation, MAC Address Cloning, Port Forwarding
Voice Gateway
SIPv2: Session Initiation Protocol v2 (RFC 3261, 3262, 3263, 3264), SIP Proxy Redundancy - Dynamic via DNS SRV, A Records, Re-registration with Primary SIP Proxy Server, SIP Support in Network Address Translation Networks - NAT (incl. STUN), Secure (Encrypted) Calling via Pre-Standard Implementation of Secure RTP, Codec Name Assignment
Voice Algorithms
G.711 (A-law and μ-law), G.726 (16/24/32/40 kbps), G.729 A, G.723.1 (6.3 kbps, 5.3 kbps), Dynamic Payload, Adjustable Audio Frames per Packet
Fax Capability
Fax Tone Detection and Pass-Through (Using G.711), Fax Pass-Though - Using G.711, DTMF: In-band & Out-of-band (RFC 2833) (SIP Info), Flexible Dial Plan Support with Interdigit Timers and IP Dialing, Call Progress Tone Generation, Jitter Buffer - Adaptive, Frame Loss Concealment, Full Duplex Audio, Echo Cancellation (G.165/G.168), VAD - Voice Activity Detection with Silence Suppression, Attenuation / Gain Adjustments, Flash Hook Timer, MWI - Message Waiting Indicator Tones, VMWI - Visual Message Waiting Indicator via FSK, Polarity Control, Hook Flash Event Signaling, Caller ID Generation (Name & Number) - Bellcore, DTMF, ETSI, Music on Hold Client, Streaming Audio Server - up to 10 sessions
Security
Password Protected System Reset to Factory Default, Password Protected Admin and User Access Authority, Provisioning/Configuration/Authentication: HTTPS with Factory Installed Client Certificate, HTTP Digest - Encrypted Authentication via MD5 (RFC 1321), Up to 256-bit AES Encryption
Provisioning, Administration & Maintenance
Web Browser Administration & Configuration via Integrated Web Server, Telephone Key Pad Configuration with Interactive Voice Prompts, Automated Provisioning & Upgrade via HTTP, TFTP, Asynchronous Notification of Upgrade Availability via SIP NOTIFY, Non-intrusive, In-Service Upgrades, Report Generation & Event Logging, Stats in BYE Message, Syslog & Debug Server Records - Per Line Configurable, Per Line and Purpose Configurable Syslog and Debug Options
Physical Interfaces
2 100baseT RJ-45 Ethernet Port (IEEE 802.3) -- 1 WAN, 1 LAN, 1 RJ-11 FXS Phone Ports - For Analog Circuit Telephone Device (Tip/Ring), 1 RJ-11 FXO Phone Ports - For a Telco or PBX Connection
FXS
Ring Voltage: 40-55 VRMS Configurable
Subscriber Line Interface Circuit (SLIC)
Ring Frequency: 10 Hz - 40 Hz, Ring Waveform: Trapezoidal and Sinusoidal, Maximum Ringer Load: 3 REN, On-hook/off-hook Characteristics: On-hook voltage (tip/ring): -50 V NOMINAL, Off-hook current: 25 mA min, Terminating Impedance: 8 Configurable Settings including, North America 600 ohms, European CTR21
Reg. Compliance:
FCC (Part 15 Class B), CE, ICES-003, A-Tick Certification, RoHS
Power Supply
DC Input Voltage: +5 VDC at 2.0 A Max.. Power Consumption: 5 Watts. Switching Type (100-240v) Automatic. Power Adapter: 100-240v - 50-60Hz (26-34VA) AC Input
Indicator Lights/LED
Power, Internet, Phone 1, Phone 2
Documentation
Quick Installation, User, and Configuration Guides, are downloaded from www.Linksys.com, Administration Guide - Service Providers Only, Provisioning Guide - Service Providers Only
Environmental
Dimensions
3.98 x 3.98 x 1.10 in.
WxHxD
(101 x 101 x 28 mm)
Unit Weight
5.11 oz. (0.145 kg)
Operating Temperature
32ºF to 113º F (0ºC to 45º C)
Storage Temperature
-13ºF to 185º F (-25ºC to 85º C)
Operating Humidity
10 to 90% Non-condensing, operating and non-operating


Package Contents:

1 - SPA3102 Phone Adapter Unit
1 - Power Adapter
1 - RJ-45 Ethernet Cable
1 - stents
1 - Telephone lines
1- Quick Installation Guide